Needing Accord F22B2 Turbo map

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Locked
Neke1point0
Posts: 13
Joined: Mon Feb 04, 2008 2:56 pm

Needing Accord F22B2 Turbo map

Post by Neke1point0 »

As stated, im in need of a map for my new s300 P06.

its a pretty basic set up nothing amazing.

stock F22B2 motor
log manifold
t3/t04e .63 AR
38mm wastegate
450cc DSMs
walbro 255lph
2.5 downpipe/charge pipes

i know someone has to have one !!! TIA
rdelsol95
Posts: 7
Joined: Wed Feb 20, 2008 4:19 pm
Location: covington ga
Contact:

f22b1 turbo

Post by rdelsol95 »

here is my calibration on a f22b1 with a t3 t4 turbo same setup as u just with 550cc rc injectors
Attachments
mytune1.skl
(30.74 KiB) Downloaded 702 times
street legal go kart
Neke1point0
Posts: 13
Joined: Mon Feb 04, 2008 2:56 pm

Post by Neke1point0 »

thanks ! cant wait to try it out ! nothing sucks more than having a full turbo set up but not being able to hit boost :evil: how many pounds of boost were u running ?
rdelsol95
Posts: 7
Joined: Wed Feb 20, 2008 4:19 pm
Location: covington ga
Contact:

Post by rdelsol95 »

7 no controller 9 on lo boost and 12 on high
street legal go kart
Neke1point0
Posts: 13
Joined: Mon Feb 04, 2008 2:56 pm

Post by Neke1point0 »

thanks again ! i havent had a chance to try this map out yet. i will reinstall my 450's and give it a shot this weekend... i re-installed stock inj and ecu for the mean time. i made an appointmnt almst a mnths ago to be tuned by Mase on the 9th. i finished my project a lil earlier than expected :D , but now im just so ferarful of blowing the motor wo a proper tune. :? hoepfully this will last me till then !!
91accordexr33
Posts: 6
Joined: Fri Mar 07, 2008 10:05 pm

Post by 91accordexr33 »

Im also going to try out this cal. as well, if you dont mind :wink:

Running a F22b1, fully built, with a GT3076R, 1000cc

I'll just throw some fuel on the boost portion and hope for the best, lol
Locked