I had a similar issue, mine was just solid green.. Where are your grounds? Your diagram above doesnt even mention where they are. Hope this helps.deafy wrote:Still unable to get ahold of a laptop to do any troubleshooting.
Hondata not reading wideband via ELD
I'm using p72 ecu. I checked readings with ELD enabled and disabled, I have changed settings to read from d10 and etc. Green 0.00 all the way. I used the LM-1 voltage settings for both d10 and stock o2 wiring, 1v=10 AFR, 2v=20 AFR.
1997 Prelude - under the knife.
2000 Insight - k20z3 swap, pt6262, e85. 508whp@19psi.
2000 Insight - k20z3 swap, pt6262, e85. 508whp@19psi.