Turbo b16 base map

[noobdata]

Hey I’m looking for a base map just to get the car running ok. Also this is my first time for any of this so please bear with me.
I have
450 wahlbro
Stock injectors
B18c1 block and internals
B16 head that I think is stock
Gt35 eBay turbo.
P28 ecu
I’m currently waiting for a turbo exhaust flange to come in so I dont have any wideband. AlSo I removed the o2 sensor and it’s putting the car in limp mode is there a way to bypass that.

Idk what else I should list
I do plan on getting injectors

[noobdata]

Also have stock map sensor and also plan to upgrade

[noobdata]

Anyone?

[Boostedintegra]

shoot me a private message and i can get you shorted out

[noobdata]

shoot me a private message and i can get you shorted out

Sent a pm I think lol and thanks

[noobdata]

Still need a base map

[noobdata]

Anyone?

[CalibratEd]

Have you tried the Stock b16 or b18 calibration files? Since you are running the stock injectors and map it should not run too bad. You can datalog the car and I can review it make sure the wideband is connected properly.

-Ed

[noobdata]

Have you tried the Stock b16 or b18 calibration files? Since you are running the stock injectors and map it should not run too bad. You can datalog the car and I can review it make sure the wideband is connected properly.

-Ed

Might take you up on that I haven’t put the wideband on yet since I’m still waiting on a 90 for my exhaust. Can I pm you when I’m set?

[CalibratEd]

Sure thing.

-Ed