h22supercharger 550 injectors

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Locked
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

h22supercharger 550 injectors

Post by Spunkster »

h22supercharger 550 injectors
Attachments
h22supercharger550.skl
(15.8 KiB) Downloaded 1854 times
Last edited by Spunkster on Wed Apr 29, 2009 12:41 pm, edited 2 times in total.
rommelduran
Posts: 1
Joined: Thu Jun 08, 2006 7:51 pm

Re: h22supercharger 550 injectors

Post by rommelduran »

hello, i'm trying to see if you have a s300 calibration for a h22 turbo with 750cc injectors !!! I would really be greatfull!!!!
ludechopper
Posts: 10
Joined: Mon May 01, 2006 6:53 am

Post by ludechopper »

has anyone modified this to work with a motorvations boost upgrade pulley or does anyone know what would need to be changed I want to get it close where I can drive it to have it tuned
turbo95lude
Posts: 7
Joined: Mon Sep 19, 2005 6:04 pm

Post by turbo95lude »

How many lbs of boost is this calibration tuned to?
Thanks,
Gforce2rbolude
410@18psi
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

To about 10 psi with a Jacksonracing Supercharger. THis should not be used with a turbo.
quickaccord93
Posts: 5
Joined: Sun Jan 08, 2006 2:52 pm
Location: Montreal, Canada
Contact:

Post by quickaccord93 »

thanks for this calibration

you fix my idle problem :D but for your information, this calibration run very lean in boost

spec: h23a vtec, JRSC, 550 cc injector
deafy
Posts: 191
Joined: Mon Jul 10, 2006 6:22 pm
Contact:

Post by deafy »

How much boost are you running?
1997 Prelude - under the knife.
2000 Insight - k20z3 swap, pt6262, e85. 508whp@19psi.
quickaccord93
Posts: 5
Joined: Sun Jan 08, 2006 2:52 pm
Location: Montreal, Canada
Contact:

Post by quickaccord93 »

7 psi

I dont have any control on boost level with the JRSC
Locked