Will this feature be beneficial to combat the quick decel of a lightweight flywheel (8lb)?
If so, can you suggest or provide guidance as to how to configure the settings?
My main issue is with the lightweight flywheel, shifting up to the next gear at lower speeds has become a chore since the rpms fall so quickly causing the synchros to not engage smoothly.. I currently keep my foot on the throttle and shift, or wait and double clutch to shift smoothly..
Ideally, if this function could allow the car's rev to hang a bit more, then I would not have to keep my foot on the throttle while shifting.
Anyone have a similar issue and was able to successfully address this via flashpro?
Thanks!
Overrun throttle opening (rev hang)
FlashPro questions & answers specific to the 2006-2009 (US, UK, Asia) S2000
Return to “S2000 2006-2009 Americas/Europe/Asia”
Jump to
- General
- ↳ Hondata News
- ↳ Applications
- ↳ Non-Hondata
- s100/s200/s300
- ↳ s300 / SManager
- ↳ S300 Calibrations
- ↳ SManager Display Templates
- ↳ s100/s200
- ↳ Romeditor 4 Software
- ↳ HondaLogger Software
- ↳ Coil Pack Retrofit
- K-Series
- ↳ K-Pro / KManager
- ↳ K-Pro Calibrations
- ↳ KManager Display Templates
- ↳ K-Series Reflash
- FlashPro
- ↳ FlashPro Manager
- ↳ FlashPro Calibrations
- ↳ Accord 2008+ FlashPro
- ↳ Civic Si 2006-2011 Americas
- ↳ Civic Si 2012-2015 US/Canadian / 2013+ ILX
- ↳ Civic Type R 2006-2010 Japanese FD2
- ↳ Civic Type R 2007-2011 European FN2
- ↳ Civic Type R 2015+
- ↳ Civic 2016+ 1.5 Turbo Americas/Asia
- ↳ CRV 2017+
- ↳ CR-Z 2010-2012 US/Europe/Asia
- ↳ Fit 2007-2008
- ↳ RDX 2007-2012
- ↳ S2000 2006-2009 Americas/Europe/Asia
- ↳ TL 2007-2008
- ↳ TSX 2004-2014
- Traction Control
- ↳ General / Traction Control Manager Software
- ↳ Traction Control with S300
- ↳ Traction Control with KPro
- ↳ Traction Control with FlashPro
- Bluetooth Mobile Apps
- ↳ Hondata Mobile