2010 FG2 need help!

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
shacklemenot0
Posts: 9
Joined: Wed Jan 25, 2023 8:07 pm

2010 FG2 need help!

Post by shacklemenot0 »

hello, I have a 2010 FG2 I just aquired. The guys said it was tuned by someone, but upon further inspection, it almost seems that its just a base calibration w/ flex fuel enabled.

Mods are
AEM SRI
Megan racing header
grams 550cc injectors
sirimoto flex fuel kit
stock fuel pump as far as i know
91octane fuel

I do not have flex fuel where i live only 91 octace, reno nevada.
I think it might be running lean & there is some knock?
If anyone can look over the data log, & Calibration...
Attachments
tune.4-bee.x(k20flaspro)flex.fpcal
(25.86 KiB) Downloaded 71 times
datalog0005.fpdl
(100.94 KiB) Downloaded 63 times
shacklemenot0
Posts: 9
Joined: Wed Jan 25, 2023 8:07 pm

Re: 2010 FG2 need help!

Post by shacklemenot0 »

Anyone?
I can post another data log if need be… just kinda hard to do a 3rd gear pull around here.

The car idles rough, but my afr on the tach reads between 4K-5k which should be about 14.5 or so afr?
Are these 550cc injectors messing it up?
If set from 310 to 550 in the Fuel section shouldn’t everything compensate for it? I’m so confused.
Dude said this was tuned by a reputable tuner but it runs like crap
Ugh
shacklemenot0
Posts: 9
Joined: Wed Jan 25, 2023 8:07 pm

Re: 2010 FG2 need help!

Post by shacklemenot0 »

Delete this please
Going to post for help in a different section


Thanks
Post Reply