No Wideband input into ecu
No Wideband input into ecu
Hi, I connected my PLX o2 wideband into B29 of the ecu and selected EGRL in the wideband lambda input. However, there is no reading in hondata sensor or datalog.
- Attachments
-
- 8 Oct 2021.fpdl
- (261.73 KiB) Downloaded 163 times
-
- Remove Cat 8 Oct 21 New Wideband.fpcal
- (20.05 KiB) Downloaded 154 times
Re: No Wideband input into ecu
Was there a wire in that spot of the harness?
Re: No Wideband input into ecu
No, it was unused so I connected the wire there
Re: No Wideband input into ecu
The Japanese ECU may not have the circuitry needed for this to work on that input since there was no wire there.
Re: No Wideband input into ecu
This information was from Hondata that B29 is supposed to be unused
- Attachments
-
- hondata B29.jpg (60.53 KiB) Viewed 3535 times
Re: No Wideband input into ecu
2007 JDM FD2 Type R ECU
Re: No Wideband input into ecu
I do not think that ECU has the internal circuitry to support an input on B29.
Hondata