Aem digital boost gauge install

s300 and SManager software questions & answers
Post Reply
Projekt2nr
Posts: 8
Joined: Thu Feb 11, 2016 3:42 am

Aem digital boost gauge install

Post by Projekt2nr »

I wired up my digital boost and uego wideband to the same wires rywire tapped the uego wideband on my obd2b jumper and kept blowing my fi e/m 15a fuse. I’ve since decide to just wire the uego to d10 can I leave the digital boost gauge on d14? Or should I wire the digital boost away from the ecu? Thanks
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Aem digital boost gauge install

Post by Spunkster »

What are you trying to send to the ECU with the boost gauge?
Projekt2nr
Posts: 8
Joined: Thu Feb 11, 2016 3:42 am

Re: Aem digital boost gauge install

Post by Projekt2nr »

Spunkster wrote: Mon Nov 30, 2020 10:50 am What are you trying to send to the ECU with the boost gauge?
i was hoping to just get the boost readouts matching as s300 reads. should i use the blue wire to an analog input or dont and just not connect it to the ecu
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Aem digital boost gauge install

Post by Spunkster »

Draw a diagram of exactly how you have this wired please.
Projekt2nr
Posts: 8
Joined: Thu Feb 11, 2016 3:42 am

Re: Aem digital boost gauge install

Post by Projekt2nr »

ill take a picture tonight homie
Post Reply