Question.
How does the bookmark work "Torque Limit" mode " Sport Torque limit"?
I read the manual.
In RDX sport mode it does not work.· Torque limit – torque limit when not in sport mode
· Sport torque limit – torque limit when in sport mode
· Sport button boost (Hondata mode) enabled – toggle this in conjunction with the other 2 boxes in the Boost Control tab in order to use both torque limit tables via the sport button
· Torque limit explanation for both CVT and MT. MT doesn’t have economy button, it has a sport button.
· The next factor that will limit the boost is the torque limiter found in window->calibration->torque
· You have 2 torque limits, torque limit and economy torque limit (Sport torque limit – Si models). These limits are toggled with the econ (Sport – Si models) button inside the vehicle. You will not be able to log the actual torque the ECU is seeing, but you will know you’re hitting the limit by monitoring that your table boost target doesn’t match you bp-command or your t-pedal doesn’t match the t-plate or a combination of the 2. To get closer to your table target raise the torque limiter for the mode you wish. (CVT models) Raise with caution as to not over torque the CVT.
Note. The torque limiter functions by limiting power output via closing throttle, lowering bp-command, or altering the ignition timing or a combination of all the above.
I attached calibration and datalog.