FlashProManager 3.4.3

FlashPro Manager software
User avatar
Hondata
Site Admin
Posts: 8759
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

FlashProManager 3.4.3

Post by Hondata » Wed Aug 07, 2019 11:32 am

V3.4.3 (8 Aug 2019)
  • FlashPro firmware updated to version 166
  • Replaced 'Send Information to Hondata Support' with 'Send Feedback to Hondata'
  • [FK2 FK8] Added modifications for boost limit, maximum turbocharger pressure ratio and air charge reduction.
  • [2018+ Accord 2.0] Modified initial traction control values
  • [2019 RDX] Added support for US 5YF-A88
Download here

We have replaced the 'Send Support information to Hondata' with 'Send Feedback to Hondata'. The change in name reflects that 'send support' was designed to help Hondata with specific FlashPro hardware support. Recently people started to use it for also sorts of feedback and requests, and the old implementation did not provide us with the information that would be useful to help the customer.

So 'send feedback' has the ability to attach the calibration and datalogs as well as the hardware information and a screenshot, plus has a more structured gathering of relevant information.

The second reason for the change is that we have found the people are reluctant to contact Hondata about any problems with the FlashPro or software. This will make it easier to give Hondata feedback.

Image

For the FK2/FK8 we have added the ability to disable the air charge reduction the ECU determines is necessary to keep the modeled EGTs without a certain range. If you disable this be aware that the boost will likely increase and the EGT definitely will increase.
Hondata

leechihfei
Posts: 18
Joined: Sun Jan 13, 2019 4:37 am

Re: FlashProManager 3.4.3

Post by leechihfei » Thu Aug 08, 2019 7:30 am

Hi,

I have updated my software to 3.4.3.
However, I am unable to see under MODs - the ability to disable the EGT air charge reduction.

In the youtube video, it shows "turbo" with 3 fields. But after update, I still see "boost" with 2 fields, still missing that ability to disable Air Charge reduction.

I must be missing something! Help please...

leechihfei
Posts: 18
Joined: Sun Jan 13, 2019 4:37 am

Re: FlashProManager 3.4.3

Post by leechihfei » Thu Aug 08, 2019 8:00 am

Also to add to my above query....

Reference to the YouTube video, do I CHECK the box for the "Disable EGT Air Charge Reduction" ? (In the video, the box is still UNchecked)

Thanks!

User avatar
Hondata
Site Admin
Posts: 8759
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager 3.4.3

Post by Hondata » Thu Aug 08, 2019 9:01 am

What vehicle do you have?

If you check the option to disable something that means you are disabling it.
Hondata

leechihfei
Posts: 18
Joined: Sun Jan 13, 2019 4:37 am

Re: FlashProManager 3.4.3

Post by leechihfei » Thu Aug 08, 2019 10:26 am

I have an FK8

My ECU is a XXXXX-5BF-M03

gtfrede07
Posts: 83
Joined: Sat Mar 03, 2018 3:16 pm

Re: FlashProManager 3.4.3

Post by gtfrede07 » Thu Aug 08, 2019 11:23 am

Love it! The feedback function is an excellent idea.

hapv
Posts: 29
Joined: Fri Feb 08, 2008 1:38 pm

Re: FlashProManager 3.4.3

Post by hapv » Thu Aug 08, 2019 11:40 am

leechihfei wrote:
Thu Aug 08, 2019 10:26 am
I have an FK8

My ECU is a XXXXX-5BF-M03
I have the same problem with the same ECU number

User avatar
Hondata
Site Admin
Posts: 8759
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager 3.4.3

Post by Hondata » Thu Aug 08, 2019 1:07 pm

It is there in the modifications under turbo. Send us your calibration if you can't find it.
Hondata

Sonny_FK8
Posts: 2
Joined: Wed Jul 31, 2019 5:42 pm

Re: FlashProManager 3.4.3

Post by Sonny_FK8 » Thu Aug 08, 2019 6:48 pm

I am having the same problem. My Fk8 is a '19 model. My ECU is ends in A21
Attachments
Capture2.JPG
Mod Scroll down
Capture2.JPG (257.44 KiB) Viewed 766 times
Fk8, Eventuri, 91 pump, No rev Hang, Throttle response.fpcal
My Calibration
(16.88 KiB) Downloaded 16 times
Capture.JPG
Screen shot
Capture.JPG (258.13 KiB) Viewed 766 times

User avatar
Hondata
Site Admin
Posts: 8759
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager 3.4.3

Post by Hondata » Thu Aug 08, 2019 8:44 pm

If I download and install 3.4.3 it shows the modification with your calibration. Can you check C:\Program Files (x86)\FlashPro\Modifications\CivicR-2015-DisableAirCReduction.fpmod is present?
Hondata

leechihfei
Posts: 18
Joined: Sun Jan 13, 2019 4:37 am

Re: FlashProManager 3.4.3

Post by leechihfei » Fri Aug 09, 2019 12:57 am

No, the CivicR-2015-DisableAirCReduction.fpmod is not there.

In fact, it's all indicated as CivicR-2017-xxxxxxxxxx.

So what should we do now?

User avatar
Hondata
Site Admin
Posts: 8759
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager 3.4.3

Post by Hondata » Fri Aug 09, 2019 7:43 am

Sorry, I meant the 2017 file. Is that there?
Hondata

hapv
Posts: 29
Joined: Fri Feb 08, 2008 1:38 pm

Re: FlashProManager 3.4.3

Post by hapv » Fri Aug 09, 2019 10:44 am

It is not installed on mine

leechihfei
Posts: 18
Joined: Sun Jan 13, 2019 4:37 am

Re: FlashProManager 3.4.3

Post by leechihfei » Fri Aug 09, 2019 11:07 am

No, the CivicR2017DisableAirCReduction.fpmod, is NOT present.

I checked on 2 computers of FlashPro Managers, I had updated.

User avatar
Hondata
Site Admin
Posts: 8759
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager 3.4.3

Post by Hondata » Fri Aug 09, 2019 2:12 pm

Reinstall and select the FK2 as well as the FK8.
Hondata

Locked