p0136 p0139

FK2 Civic Type R 2015-2017 and FK8 Civic Type R 2017-2018
moneybags
Posts: 8
Joined: Mon Jun 03, 2019 11:39 am

p0136 p0139

Post by moneybags » Mon Jun 03, 2019 11:59 am

2019 CTR
I've installed the catless prl downpipe with the defouler and disabled the secondary o2 sensor and p0136 and p0139 from closed loop. The car would run fine for about 15 miles and then I would get the same codes again. I would have to flash it again to get the lights off but it always comes back. how can I permanently disable these codes?

User avatar
Hondata
Site Admin
Posts: 8750
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: p0136 p0139

Post by Hondata » Mon Jun 10, 2019 3:21 pm

What software version are you using?
Hondata

RL3
Posts: 4
Joined: Fri Oct 05, 2018 2:52 pm

Re: p0136 p0139

Post by RL3 » Wed Jun 12, 2019 9:53 am

All, I am still getting p0139 just like the OP for months on end. I have the most up to date FlashPro Manager software and USB drivers. (3.3.9.0). p0139 error enable is UNchecked in closed loop. After 10-20 miles I get the p0139. I posted about this a couple months ago and didn't get a reply, has there been any update? 2017 FK8, catless DP. Thanks!

moneybags
Posts: 8
Joined: Mon Jun 03, 2019 11:39 am

Re: p0136 p0139

Post by moneybags » Wed Jul 10, 2019 1:50 pm

I've updated to the latest software version and nothing seems to work. I even have the reccomended fabspeed defouler and I still get the error

User avatar
Hondata
Site Admin
Posts: 8750
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: p0136 p0139

Post by Hondata » Wed Jul 10, 2019 2:05 pm

Please test using 4.4.1. Changes have been made since June.
Hondata

jHobz
Posts: 10
Joined: Thu Jul 11, 2019 11:27 pm

Re: p0136 p0139

Post by jHobz » Thu Jul 11, 2019 11:30 pm

I have the same problem too

User avatar
Hondata
Site Admin
Posts: 8750
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: p0136 p0139

Post by Hondata » Fri Jul 12, 2019 6:49 am

What version?
Hondata

moneybags
Posts: 8
Joined: Mon Jun 03, 2019 11:39 am

Re: p0136 p0139

Post by moneybags » Fri Jul 12, 2019 1:53 pm

Okay I've just updated to the 3.4.1 beta version. Ill reflash and see what happens

jHobz
Posts: 10
Joined: Thu Jul 11, 2019 11:27 pm

Re: p0136 p0139

Post by jHobz » Fri Jul 12, 2019 9:18 pm

Hondata wrote:
Fri Jul 12, 2019 6:49 am
What version?
3.4.1 i just got the same error again

User avatar
Hondata
Site Admin
Posts: 8750
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: p0136 p0139

Post by Hondata » Sat Jul 13, 2019 1:02 pm

Ok, thanks. Do you have the secondary o2 connected at all?
Hondata

jHobz
Posts: 10
Joined: Thu Jul 11, 2019 11:27 pm

Re: p0136 p0139

Post by jHobz » Sun Jul 14, 2019 11:43 pm

Yes it’s connected but I’m not sure if I messed up the plug going to secondary 02. I was trying to put the other end to the defouler and was pushing it really hard with the o2 socket(that can’t reach the other end). I think that screwed up the circuit because I put too much tension on it. Is that still affecting the ecu of the car even the secondary o2 was disabled via hondata?

User avatar
Hondata
Site Admin
Posts: 8750
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: p0136 p0139

Post by Hondata » Mon Jul 15, 2019 10:06 am

Ok, I've added a secondary o2 disable for the next release like the FK8.
Hondata

jHobz
Posts: 10
Joined: Thu Jul 11, 2019 11:27 pm

Re: p0136 p0139

Post by jHobz » Mon Jul 15, 2019 2:43 pm

When will be the next release?

moneybags
Posts: 8
Joined: Mon Jun 03, 2019 11:39 am

Re: p0136 p0139

Post by moneybags » Fri Jul 19, 2019 12:26 pm

Ive tried with the latest version, it doesn't work still. Hopefully the next release will fix it. I have the secondary o2 connected with the fabspeed defouler. really miss my lazy mans auto rev match

User avatar
Hondata
Site Admin
Posts: 8750
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: p0136 p0139

Post by Hondata » Fri Jul 19, 2019 6:22 pm

What version? Did you uncheck both the secondary o2 sensor and P0136?
Hondata

Post Reply