Flashpro Help - "Unknown Vehicle" and cannot see VIN
Flashpro Help - "Unknown Vehicle" and cannot see VIN
Flash Pro Serial FP-TSX-US-90305
TSX ECU: 37820-RBB-A71
Having a problem to connect TSX ECU with Flashpro.
Have recorded VIN in ECU but cannot upload any calibrations or connect to FlashPro.
Attached below are the error messages.
Vehicle Model: Unknown
Vehicle Family: Unknown.
Cannot see VIN no in History tab??
What am i doing wrong?
Please help.
TSX ECU: 37820-RBB-A71
Having a problem to connect TSX ECU with Flashpro.
Have recorded VIN in ECU but cannot upload any calibrations or connect to FlashPro.
Attached below are the error messages.
Vehicle Model: Unknown
Vehicle Family: Unknown.
Cannot see VIN no in History tab??
What am i doing wrong?
Please help.
Re: Flashpro Help - "Unknown Vehicle" and cannot see VIN
What vehicle is this being used in? What is the ECU part number?
Re: Flashpro Help - "Unknown Vehicle" and cannot see VIN
TSX ECU: 37820-RBB-A71 is being used.
Vehicle that i am using is a Australian 2004 Honda Accord Euro.
Vehicle that i am using is a Australian 2004 Honda Accord Euro.
Re: Flashpro Help - "Unknown Vehicle" and cannot see VIN
I believe that it does not recognize the part number. Use 'send support information to Hondata' and we will see.
Hondata
Re: Flashpro Help - "Unknown Vehicle" and cannot see VIN
information has just been sent to Hondata support as requested.
Re: Flashpro Help - "Unknown Vehicle" and cannot see VIN
The ECU is not reporting a calibration ID nor part number so the FlashPro cannot recognize it.
Hondata
Re: Flashpro Help - "Unknown Vehicle" and cannot see VIN
Ok so does this mean I have a issue with the flash pro unit or the ecu?
Also what do I do to fix the issue?
Also what do I do to fix the issue?
Re: Flashpro Help - "Unknown Vehicle" and cannot see VIN
It is the ECU. What's the full story - vehicle, origin of the ECU, any changes to the ECU etc.
Hondata
Re: Flashpro Help - "Unknown Vehicle" and cannot see VIN
No story to tell actually.
TSX ECU came from a stock standard Accord TSX from the US which still runs the car fine.
What do i do next to resolve this issue?
TSX ECU came from a stock standard Accord TSX from the US which still runs the car fine.
What do i do next to resolve this issue?
Re: Flashpro Help - "Unknown Vehicle" and cannot see VIN
If the ECU runs the vehicle, has the immobilizer been matched or disabled?
Hondata
Re: Flashpro Help - "Unknown Vehicle" and cannot see VIN
Yes the immobilizer has been matched and it is starting the vehicle.
datalogging also works when flashpro is connected.
just cant upload a calibration map.
datalogging also works when flashpro is connected.
just cant upload a calibration map.
Re: Flashpro Help - "Unknown Vehicle" and cannot see VIN
The ECU is not reporting a calibration ID nor part number. That is the problem.
Hondata
Re: Flashpro Help - "Unknown Vehicle" and cannot see VIN
How do i make the ecu report a calibration ID and part number?
Re: Flashpro Help - "Unknown Vehicle" and cannot see VIN
It is either the FlashPro, wiring or ECU. The FlashPro is reading the battery voltage and VIN, so it looks ok. Likewise the wiring is ok since the FlashPro can read the previous two items. However the FlashPro cannot see the ECU serial number which it needs to determine what the ECU is. So it most likely is the ECU.
The next steps to narrow it down would be to the FlashPro into another vehicle and check that it recognizes the ECU and /or use another ECU on you vehicle.
People disable the immobilizer by altering the ECU, which also disables the serial number, which is why I asked about the immobilizer.
The next steps to narrow it down would be to the FlashPro into another vehicle and check that it recognizes the ECU and /or use another ECU on you vehicle.
People disable the immobilizer by altering the ECU, which also disables the serial number, which is why I asked about the immobilizer.
Hondata