Recommendation map for a completely stock 2008 Civic Si?
Recommendation map for a completely stock 2008 Civic Si?
Just bought Hondata as the first mod for my car, planning to do full bolt on’s in the future but decided to start with Hondata to wake the car up. Would I be fine running the stock base map on hondata? Or can anyone recommend me a map to run for now until I get future mods? Thanks a bunch.
-
- Posts: 3
- Joined: Mon Oct 08, 2018 10:42 am
Re: Recommendation map for a completely stock 2008 Civic Si?
Hi. Will that map work on FN2?
I am asking because Group N is even worse than the stock. Ignition timings are awfull, VTC tables are not smooth. At low engine speed car is not pulling at all. After 70mph on 6th gear acceleration is weak. Fine tunning fuel maps - did almost nothing.
I am asking because Group N is even worse than the stock. Ignition timings are awfull, VTC tables are not smooth. At low engine speed car is not pulling at all. After 70mph on 6th gear acceleration is weak. Fine tunning fuel maps - did almost nothing.
Re: Recommendation map for a completely stock 2008 Civic Si?
No that calibration will not work with your ECU. You must use the FN2 calibrations.
-
- Posts: 3
- Joined: Mon Oct 08, 2018 10:42 am
Re: Recommendation map for a completely stock 2008 Civic Si?
Copying maps from it? Ignition fuel VTC?