knock retard

[hapv]

Is this knock retard so much?

[Hondata]

It looks like a lot of knock.

Retard the ignition 4 degrees everywhere for all tables and see if the knock retard goes down. If so, then you are over-advanced.

The Bosch ECU does not have very good knock control and you have to do it all yourself in the tables.

[sass]

The Bosch ECU does not have very good knock control and you have to do it all yourself in the tables.

Hello.
I have not find on the forum explanation of how the ignition cards in FK8 now work.
Will there be a full explanation in the help and how to control the ignition?

[Spunkster]

Have you read the info in the help file about ignition: https://www.hondata.com/help/flashpro/fk2_fk2_notes.htm

[sass]

Ок.
Question.
Ignition (In Cam +) = Ignition advanced?
Ignition (In Cam - ) = Ignition retarded?
How does the table work Ignition (In Cam - & Ex Cam + ) ?
Thanks

[Hondata]

'In Cam' = 'Intake Camshaft'.

All the ignition tables are in degrees advance.

[sass]

OK.
Last question.
Why the ignition angles in the tables do not correspond to the graphs of the datalog in the mode WOT?
I'm watching a "datalog0001.fpdl"
The picture above is a blue and red circle.

[Hondata]

There are many corrections between the ignition tables and the actual ignition.