07 Si Basemap Lean at WOT

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
alarose64
Posts: 7
Joined: Mon Oct 05, 2015 12:48 pm

07 Si Basemap Lean at WOT

Post by alarose64 »

Hi all. I recently got flashpro for my 07 Si with a K&N SRI and Vibrant exhaust. I flashed the K&N SRI MAP based tune and did a few WOT pulls and noticed it is running a bit lean. From the datalog attached, it seems like it is high 13s at WOT with jumps to 14 A/F. I have tried using the stock, tuned basemap and have the same problem. On this particular log, I got no knocks and the car feels a lot peppier than bone stock, but I am worried about high cylinder temperatures leading to long term damage.

Can someone take a look at the log and tell me if everything looks okay, or if it is in fact running an unsafe A/F?
K&N SRI MAP based.fpdl
datalog
(176.54 KiB) Downloaded 155 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: 07 Si Basemap Lean at WOT

Post by EFICU »

Hi,

Yes it is too lean in the wide open throttle areas. If you'd like I can help you richen it up and dial it in better if you send me the file you're running on.
alarose64
Posts: 7
Joined: Mon Oct 05, 2015 12:48 pm

Re: 07 Si Basemap Lean at WOT

Post by alarose64 »

Thanks man. Here is the basemap I was using.
Attachments
K&N V2 SRI BASEMAP.fpcal
(19.05 KiB) Downloaded 141 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: 07 Si Basemap Lean at WOT

Post by EFICU »

alarose64 wrote: Wed Mar 06, 2019 3:44 pm Thanks man. Here is the basemap I was using.
Check your PM's.
GhostGreyFg2
Posts: 1
Joined: Sat Mar 23, 2019 8:54 am

Re: 07 Si Basemap Lean at WOT

Post by GhostGreyFg2 »

Try this Basemap
Attachments
K&N V2 SRI BASEMAP ALAROSE.fpcal
(19.03 KiB) Downloaded 162 times
Post Reply