S300v3 injector duty cycle drop out

s300 and SManager software questions & answers
Post Reply
Lmayoral2191
Posts: 6
Joined: Sun Feb 10, 2019 10:39 pm

S300v3 injector duty cycle drop out

Post by Lmayoral2191 » Sun Feb 10, 2019 10:48 pm

I’ve had the Hondata s300 installed on my car for over 3years and have had no problems until now, just recently I’ve been having injector duty cycle drop out under WOT. Right at 4K rpms, right around 55% duty cycle, it’ll drop to 12% then pick up to 25% then back down then back up. Car recently started having this issue, injectors have been in the car for about 1yr 550cc grams.

My question is what can cause this issue, for the duty cycle to be dropping out? Fuel pressure? Fuel regulator? Bad injectors? Or electrical issue? Any sort of guidance would be great, thanks!

User avatar
Spunkster
Site Admin
Posts: 18087
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: S300v3 injector duty cycle drop out

Post by Spunkster » Mon Feb 11, 2019 10:17 am

You need to post the calibration as well ass a datalog showing the issue.

Lmayoral2191
Posts: 6
Joined: Sun Feb 10, 2019 10:39 pm

Re: S300v3 injector duty cycle drop out

Post by Lmayoral2191 » Mon Feb 11, 2019 11:19 am

Here is the info
Attachments
f23 data log injector drop out.s3d
(158.52 KiB) Downloaded 20 times
f23 injector drop out.skl
(50.78 KiB) Downloaded 19 times

User avatar
Spunkster
Site Admin
Posts: 18087
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: S300v3 injector duty cycle drop out

Post by Spunkster » Mon Feb 11, 2019 12:21 pm

Are you using the Hondata injector driver and secondary injectors?

Lmayoral2191
Posts: 6
Joined: Sun Feb 10, 2019 10:39 pm

Re: S300v3 injector duty cycle drop out

Post by Lmayoral2191 » Mon Feb 11, 2019 3:56 pm

I have just changed the injector CC, this problem just started occurring. If I did not install it in a driver wouldn’t I have this problem from the beginning?

User avatar
Spunkster
Site Admin
Posts: 18087
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: S300v3 injector duty cycle drop out

Post by Spunkster » Mon Feb 11, 2019 4:20 pm

YOu have secondary injectors tuned on an it will only work with the Hondata Injector Driver.

Lmayoral2191
Posts: 6
Joined: Sun Feb 10, 2019 10:39 pm

Re: S300v3 injector duty cycle drop out

Post by Lmayoral2191 » Mon Feb 11, 2019 4:45 pm

How do I correct this issue?

User avatar
Spunkster
Site Admin
Posts: 18087
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: S300v3 injector duty cycle drop out

Post by Spunkster » Mon Feb 11, 2019 5:46 pm

If you do not have secondary injectors with the injector driver then disable it.

Lmayoral2191
Posts: 6
Joined: Sun Feb 10, 2019 10:39 pm

Re: S300v3 injector duty cycle drop out

Post by Lmayoral2191 » Mon Feb 11, 2019 6:33 pm

I must of hit this button by accident or something cause I don’t remember engaging secondary injectors. I’ll take a look at my fuel injector settings and see if I see this second injectors disactivation

Lmayoral2191
Posts: 6
Joined: Sun Feb 10, 2019 10:39 pm

Re: S300v3 injector duty cycle drop out

Post by Lmayoral2191 » Tue Feb 12, 2019 11:59 am

Thanks for the help!!!! That fixed my issue!

Post Reply