Traction control on PNF Ecu

Post Reply
sergiokazoom
Posts: 27
Joined: Sat Aug 19, 2017 10:01 am

Traction control on PNF Ecu

Post by sergiokazoom » Wed Nov 21, 2018 11:00 am

Hi! I have a 2004 Civic Si Ep3 running kpro v4. Turbo setup on boost by gear with the hondata boost solenoid. I want to purchase the Hondata Traction Control, but I am running a PNF ecu. If purchased and wired up, will the Traction Control be fully functionalrunning my PNF ecu?

User avatar
Spunkster
Site Admin
Posts: 18016
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Traction control on PNF Ecu

Post by Spunkster » Tue Nov 27, 2018 11:00 am

It will work, but you cannot use a PNF based calibration. You must use a PRB based calibration for Traction Control to be available.

Post Reply