I was checkout out some of the basmaps and the ITR one grabbed my attention. 32.75* of timing at 7000 RPM's for some reason that doesnt sound right to me. If it is please someone correct me cause i thought u didnt wanna run over 30* in the Higher RPM's
BTW this is with Hondata S300 V 1.09
too much timing in the basemaps?
Re: too much timing in the basemaps?
JDMLyfeStyle wrote:I was checkout out some of the basmaps and the ITR one grabbed my attention. 32.75* of timing at 7000 RPM's for some reason that doesnt sound right to me. If it is please someone correct me cause i thought u didnt wanna run over 30* in the Higher RPM's
BTW this is with Hondata S300 V 1.09
NA or Turbo?
If it's NA...it looks fine to me.
I had the same question. THere is also too much ignition in the 623mbar column causing too much pinging to my stock JDM ITR (alhtough I had lowered timing 2 degrees everywhere due to the higher compression of the JDM model). I removed as much as an additional 2 degrees everywhere and in the 623mbar column, 2 degrees on top of that. Now my car drives fine, is very powerful and I have no detonation.
Sorry, I meant the 535 & 650 columns. At my engine I found that I had to back off timing by 3 or even 3.5 degrees to stop detonation even with premium unleaded (100RON europe, should be equivalent to US 93 or 95) at these loads. I know this helps with driveability and fuel economy but I had detonation even at such load/medium loads.
However my engine has 11.1:1 compression like the JDM model and thus 1-2 degrees less timing is expected.
One more question about this map: At 7000-7500rpm the timing falls sharply by 5.25 degrees in just 500rpm. Is this normal? Did it work on the dyno? I am going to dynotune soon my car and see if it likes it or not. Your basemap feels strong on the street though.
However my engine has 11.1:1 compression like the JDM model and thus 1-2 degrees less timing is expected.
One more question about this map: At 7000-7500rpm the timing falls sharply by 5.25 degrees in just 500rpm. Is this normal? Did it work on the dyno? I am going to dynotune soon my car and see if it likes it or not. Your basemap feels strong on the street though.