2019 2.0t 6 speed p0139 and p0113 codes

FlashPro questions & answers specific to the 2008+ Accord, Americas and international
Post Reply
Snpxgen
Posts: 2
Joined: Mon Aug 03, 2020 12:10 pm

2019 2.0t 6 speed p0139 and p0113 codes

Post by Snpxgen »

2019 2.0t 6 speed
Rv6
Borla catback
Afe intake

Car is custom dyno tuned 290whp and 357wtrq

Running perfect no loss on power but these annoying codes popped up

P0139- o2 sensor slow response Bank 1
P0113- intake air temperature circuit high input

I reset them both and cleaned the intake air sensor with maf cleaner which could of been from the oiled afe intake
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 2019 2.0t 6 speed p0139 and p0113 codes

Post by Spunkster »

You will need to follow the factory troubleshooting steps for the IAT error, and have you tried disabling the secondary O2 sensor?
Snpxgen
Posts: 2
Joined: Mon Aug 03, 2020 12:10 pm

Re: 2019 2.0t 6 speed p0139 and p0113 codes

Post by Snpxgen »

Are these errors related to each other?

I received both around 50miles after my dyno tune.
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 2019 2.0t 6 speed p0139 and p0113 codes

Post by Spunkster »

Probably not.
kpthemanatee
Posts: 18
Joined: Wed Aug 12, 2020 4:15 pm

Re: 2019 2.0t 6 speed p0139 and p0113 codes

Post by kpthemanatee »

bout to install prl downpipe, front pipe and intercooler and im sure ill get a check engine light. they told me to check the secondary o2 sensor off? where do i do that?
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 2019 2.0t 6 speed p0139 and p0113 codes

Post by Spunkster »

It is in the closed loop section of the calibration window.
kpthemanatee
Posts: 18
Joined: Wed Aug 12, 2020 4:15 pm

Re: 2019 2.0t 6 speed p0139 and p0113 codes

Post by kpthemanatee »

nvm, i found it!
kpthemanatee
Posts: 18
Joined: Wed Aug 12, 2020 4:15 pm

Re: 2019 2.0t 6 speed p0139 and p0113 codes

Post by kpthemanatee »

is there any in particular i should be changing on the calibration with the intercooler, frontpipe and downpipe installed? trying to maximize power but more importantly reliability.

thanks!
Post Reply