P0103 at night time only

FK2 Civic Type R 2015-2017, FK8 Civic Type R 2017-2021, FL5 Civic Type R 2023+ and Integra Type S 2024+
Post Reply
trailslide
Posts: 7
Joined: Sun Jan 12, 2020 12:31 am

P0103 at night time only

Post by trailslide »

I got an interesting issue. The car will do full throttle just fine during the day time, but doing full throttle runs at night time always throw a p0103 error.

stock intake with sprint/spoon filter, rv6 hfc dp, stock exhaust, stock turbo, hks intercooler, blitz radiator. alot of inconel and gold tape wrapped charge pipe.
custom tune on 100 octane.

any advice for this scenario?

logs attached
fullthrottle afternoon is the one without CEL
fullthrottle night is the one with CEL p0103 error
Attachments
fullthrottle-night.fpdl
(22.08 KiB) Downloaded 58 times
fullthrottle-afternoon.fpdl
(34.36 KiB) Downloaded 54 times
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: P0103 at night time only

Post by Hondata »

Air temp is nearly 20 degrees colder. Post the calibration.
Hondata
trailslide
Posts: 7
Joined: Sun Jan 12, 2020 12:31 am

Re: P0103 at night time only

Post by trailslide »

the tune is locked by tuner :( i don't have access to it.

Just trying to get some advice on this issue, as it seems to be uncommon.

just based on the logs alone, what do you think might be a possible solution?

Any advice and wisdom regarding the AFM logics would be greatly appreciated !
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: P0103 at night time only

Post by Spunkster »

If it is locked, then only the tuner will be able to make changes. You need to discuss this issue with the tuner so they can help you resolve it.
trailslide
Posts: 7
Joined: Sun Jan 12, 2020 12:31 am

Re: P0103 at night time only

Post by trailslide »

of course, just wanted to see if this scenario has came up for others before, and what they did to resolve it, thanks.

i'm not trying to fix it my self, just wanted to get some ideas.
trailslide
Posts: 7
Joined: Sun Jan 12, 2020 12:31 am

Re: P0103 at night time only

Post by trailslide »

P0103 is for MAF high voltage output? what's the criteria to trigger this, any one know or any hypothesis?

if you look at the log MAF voltage went up to around 4.7v. Would that be enough to trigger the P0103?

is it possible to see exactly when the DTC error occurred using hondata log? (this was logged through the flashpro device)
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: P0103 at night time only

Post by Hondata »

This is all non productive speculation. Without the calibration we cannot tell if the error has been disabled.
Hondata
trailslide
Posts: 7
Joined: Sun Jan 12, 2020 12:31 am

Re: P0103 at night time only

Post by trailslide »

Hi !

a couple of non speculative questions =) this is really just my curiosity to understand more about the ecu i'm using

1. AFM maximum voltage enable, if you uncheck this, what does the ecu do?
2. If you disable P0103 in Misc DTC, what does the ECU do?
Post Reply