dyno

FK2 Civic Type R 2015-2017 and FK8 Civic Type R 2017-2018
Post Reply
Typer_guy
Posts: 2
Joined: Tue Jan 01, 2019 3:57 pm

dyno

Post by Typer_guy » Tue Jan 01, 2019 4:00 pm

i have a question is there a way to prevent codes from coming on when on the dyno i heard there is a maintenance mode that the car can be put in when i got my car dyno all vsa light came on and i just want to make sure its not holding the power back

User avatar
Hondata
Site Admin
Posts: 8410
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: dyno

Post by Hondata » Wed Jan 02, 2019 11:19 am

See https://www.hondata.com/help/flashpro/fk2_fk2_notes.htm

On the FK8 in R mode you can hold the VSA button for 10 seconds to disable the VSA completely, which will prevent errors. It should work for the FK2. Otherwise you have to do the pedal dance as outlined above.
Hondata

Typer_guy
Posts: 2
Joined: Tue Jan 01, 2019 3:57 pm

Re: dyno

Post by Typer_guy » Mon Jan 07, 2019 6:04 pm

thank you u so much i know that the car can be put in a maintenance mode and the u car spin the front wheels with no light but i will try the steps for the vsa and show my tuner the rest

mladjan
Posts: 116
Joined: Fri Sep 23, 2016 7:16 am

Re: dyno

Post by mladjan » Fri Feb 15, 2019 3:21 am

Hondata wrote:
Wed Jan 02, 2019 11:19 am
See https://www.hondata.com/help/flashpro/fk2_fk2_notes.htm

On the FK8 in R mode you can hold the VSA button for 10 seconds to disable the VSA completely, which will prevent errors. It should work for the FK2. Otherwise you have to do the pedal dance as outlined above.
When I turn VSA in R mode, will be able to do a run in comfort mode without errors? I want to compare power levels in all modes.

User avatar
Spunkster
Site Admin
Posts: 17212
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: dyno

Post by Spunkster » Fri Feb 15, 2019 10:04 am

That only works in R mode. All other modes you will have to do the pedal dance.

mladjan
Posts: 116
Joined: Fri Sep 23, 2016 7:16 am

Re: dyno

Post by mladjan » Mon Feb 18, 2019 8:15 am

Thx

Post Reply