I am using Civic Turbo MT 2017,+3 psi.
I just changed all the other settings as per the instructions, but when I rev in gear 2, all the warnings show up.
If anyone has any ideas as to what might be causing this, I'd love to hear from you!
Thanks!
When the RPMs increase, a warning appears.
Re: When the RPMs increase, a warning appears.
Have you datalogged and checked for error codes?
Re: When the RPMs increase, a warning appears.
I'm sorry. I didn't use the right words.
All the warning lights are glowing.
If I rewrite the ECU again, it goes back to normal, but if I rev it to about 5000 rpm again, all the warning lights light up.
All the warning lights are glowing.
If I rewrite the ECU again, it goes back to normal, but if I rev it to about 5000 rpm again, all the warning lights light up.
Re: When the RPMs increase, a warning appears.
You must datalog and check for error codes when this happens.
-
- Posts: 8
- Joined: Thu Aug 05, 2021 6:24 pm
Re: When the RPMs increase, a warning appears.
When the stock VSC system can not effectively stabilize the car (include tire skipping,sliding)all the alarm lights will on.
You just need to turn off and restart the car,drive normally and strightly for about 1~2km,the lights will off.
You can select "disable VSA" in the mods.
You just need to turn off and restart the car,drive normally and strightly for about 1~2km,the lights will off.
You can select "disable VSA" in the mods.