Hi,
I've noticed an issue in the Flashpro Manager when trying to make a new calibration.
When I select "Civic 1.5T US 2020 Hatch MT" and any tune option (3, 6, or 9psi), the next screen thinks I've selected Canada 2020 Hatch MT.
If I do any other year, it will stay "US 20xx Hatch MT".
Has anyone else seen this? And should I wait until this is corrected before attempting a flash at risk of bricking my ECU? It's a 2021, but the ECU for 2021 carries over from 2020 (A31).
FlashPro Manager 3.6.8.0 Selecting Wrong Vehicle
-
- Posts: 28
- Joined: Fri Jun 15, 2018 2:47 am
FlashPro Manager 3.6.8.0 Selecting Wrong Vehicle
2021 Civic Sport Hatch MT (US)
2021 HR-V....why (US)
2021 HR-V....why (US)
Re: FlashPro Manager 3.6.8.0 Selecting Wrong Vehicle
Are you doing this with the FlashPro plugged in?
Hondata
-
- Posts: 28
- Joined: Fri Jun 15, 2018 2:47 am
Re: FlashPro Manager 3.6.8.0 Selecting Wrong Vehicle
No, just making a calibration on the PC. Once I select a tune (+9), the first thing that pops up is the "Mods" screen and it says Canada. And if I exit out of mods and check the main calibration tab (version, vehicle, notes) it still says Canada.
2021 Civic Sport Hatch MT (US)
2021 HR-V....why (US)
2021 HR-V....why (US)
-
- Posts: 28
- Joined: Fri Jun 15, 2018 2:47 am
Re: FlashPro Manager 3.6.8.0 Selecting Wrong Vehicle
Ok, so as long as it says 2020 MT, it won't brick the ECU if it's saying the calibration is for Canada instead of US?
2021 Civic Sport Hatch MT (US)
2021 HR-V....why (US)
2021 HR-V....why (US)
Re: FlashPro Manager 3.6.8.0 Selecting Wrong Vehicle
Plug in the FlashPro first, then go to the New Calibration button and it will only show the calibrations that are compatible with your vehicle.