FlashPro Manager 3.6.8.0 Selecting Wrong Vehicle

Civic 2016+ 1.5 Turbo
Post Reply
zac.zavakos
Posts: 28
Joined: Fri Jun 15, 2018 2:47 am

FlashPro Manager 3.6.8.0 Selecting Wrong Vehicle

Post by zac.zavakos »

Hi,

I've noticed an issue in the Flashpro Manager when trying to make a new calibration.

When I select "Civic 1.5T US 2020 Hatch MT" and any tune option (3, 6, or 9psi), the next screen thinks I've selected Canada 2020 Hatch MT.

If I do any other year, it will stay "US 20xx Hatch MT".

Has anyone else seen this? And should I wait until this is corrected before attempting a flash at risk of bricking my ECU? It's a 2021, but the ECU for 2021 carries over from 2020 (A31).
2021 Civic Sport Hatch MT (US)
2021 HR-V....why (US)
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashPro Manager 3.6.8.0 Selecting Wrong Vehicle

Post by Hondata »

Are you doing this with the FlashPro plugged in?
Hondata
zac.zavakos
Posts: 28
Joined: Fri Jun 15, 2018 2:47 am

Re: FlashPro Manager 3.6.8.0 Selecting Wrong Vehicle

Post by zac.zavakos »

No, just making a calibration on the PC. Once I select a tune (+9), the first thing that pops up is the "Mods" screen and it says Canada. And if I exit out of mods and check the main calibration tab (version, vehicle, notes) it still says Canada.
2021 Civic Sport Hatch MT (US)
2021 HR-V....why (US)
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashPro Manager 3.6.8.0 Selecting Wrong Vehicle

Post by Hondata »

This is normal.
Hondata
zac.zavakos
Posts: 28
Joined: Fri Jun 15, 2018 2:47 am

Re: FlashPro Manager 3.6.8.0 Selecting Wrong Vehicle

Post by zac.zavakos »

Ok, so as long as it says 2020 MT, it won't brick the ECU if it's saying the calibration is for Canada instead of US?
2021 Civic Sport Hatch MT (US)
2021 HR-V....why (US)
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: FlashPro Manager 3.6.8.0 Selecting Wrong Vehicle

Post by Spunkster »

Plug in the FlashPro first, then go to the New Calibration button and it will only show the calibrations that are compatible with your vehicle.
Post Reply