Hi Everyone,
I want to learn kncok ignition limit table setting issue. I have some log that which part i need to consider and check it that i need to know it.
For example i learned from my car, between 5500-60000d/d knock control is increasing from 54 to 65 very quickly and also aftercooler temps is rising as well. So whats the point of the knock limitation settings and how to set it?
Thanks
How to set knock ignition table
Re: How to set knock ignition table
The idea would be to follow the cells via map tracing in that rpm range your experiencing knock control movement and lower the number. Although typically you should not have to reduce timing on the base maps as they are already extremely conservative.