Calibration can’t be locked to my ecu. PLEASE HELP !!!

Civic 2016+ 1.5 Turbo
Post Reply
derekdimar1127
Posts: 8
Joined: Thu Dec 28, 2017 4:41 pm

Calibration can’t be locked to my ecu. PLEASE HELP !!!

Post by derekdimar1127 »

My ecu part number is 37820-5AN-L63. When I go to lock to my ecu I get an error message. It says it’s an unrecognized calibration. Calibration id # is 37805-5AN-L630
Jun43
Posts: 248
Joined: Mon Aug 01, 2016 2:59 pm

Re: Calibration can’t be locked to my ecu. PLEASE HELP !!!

Post by Jun43 »

derekdimar1127 wrote: Fri Dec 29, 2017 7:07 pm My ecu part number is 37820-5AN-L63. When I go to lock to my ecu I get an error message. It says it’s an unrecognized calibration. Calibration id # is 37805-5AN-L630
did you seriously make another post... I told you what to do..

Your ecu is not supported. You NEED to contact support by emailing them( support @ hondata.com ) . So you can take the next step for them to add it.
derekdimar1127
Posts: 8
Joined: Thu Dec 28, 2017 4:41 pm

Re: Calibration can’t be locked to my ecu. PLEASE HELP !!!

Post by derekdimar1127 »

When I type in my ecu on the website to see if it’s supported it says it is. I emailed them but they haven’t responded.
Jun43
Posts: 248
Joined: Mon Aug 01, 2016 2:59 pm

Re: Calibration can’t be locked to my ecu. PLEASE HELP !!!

Post by Jun43 »

The sticker on the outside of the ecu doesn't always match up with the ECU ID on the ecu.

Like i said before, you need to email support@hondata.com
Post Reply