o2 heater control

HondaLogger datalogging software questions and answers.
Locked
kender
Posts: 32
Joined: Mon Aug 02, 2004 9:29 pm

o2 heater control

Post by kender »

ok, most of the wideband o2's say to install a 1k ohm resistor across the heater control wires to avoid throwing a cel for the o2 heater. can I skip this if I select the o2 heater control in the hondalogger. I will be leaving the wideband installed for daily driving. I have read the hondalogger manual and the romeditor manual but nothing covers this specifically. thanks
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata »

At the moment it is best to put the 1k resistor in.
Hondata
kender
Posts: 32
Joined: Mon Aug 02, 2004 9:29 pm

Post by kender »

thanks, sounds like you are working on an improvement for this.
Locked