Hondata

I have a 2007 civic SI with a hondata flashpro. I did not do the tune on the car, so i'm pretty new at this. My car recently started misfiring and now I can't get it to start. i connected my laptop with the flash pro and to the odbII port. in the flashpro manager in the bottom left, I see that the driver and flashpro have green check marks but the odbII port and ECU have red X's. I would think I need those to be "green" to get any kind of data.
I have the ignition on. Any thoughts on how to get these "green" or if I don't need them in this state, how I can pull some error codes?

thank you

Not sure how I got past this, but now, all lights are green including OBDII AND ECU.

Now that I ironed that out, can someone tell me how to read the error codes from the ECU?

Thanks

so still trudging through this.

Any other way to check for errors in the ECU?

Thanks

While datalogging just click the error codes button at the top and you can see any error codes in that window.

Thanks Spunkster. appreciate it.