revert to previous base map

FlashPro questions & answers specific to the 2007-2012 Acura RDX
Post Reply
HABH8R
Posts: 4
Joined: Fri Sep 13, 2019 7:57 am

revert to previous base map

Post by HABH8R » Fri Sep 13, 2019 8:06 am

Question, 2 years ago I loaded a base map for SRI and loved it...eliminated some lag and livened up shift points. Recently I wanted to see the next base map for my next bolt on's and was prompted to update the manager software which in turn updated and prompted me to update my base map.

I'm not sure if I had an option to save the original base map or if it was automatically overwritten...

Not too happy with the current base map and was wondering if I can revert?

Thanks in advance

User avatar
Spunkster
Site Admin
Posts: 17932
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: revert to previous base map

Post by Spunkster » Fri Sep 13, 2019 9:44 am

You should save your calibrations to your hard drive so you can have access to them any time. If you have overwritten the file without having it saved somewhere then it is gone and you will have to go to the New Calibration button and select a new calibration to use.

HABH8R
Posts: 4
Joined: Fri Sep 13, 2019 7:57 am

Re: revert to previous base map

Post by HABH8R » Fri Sep 13, 2019 10:56 am

thanks that what I thought...I overwrote the previous calibration in error

I have the new calibration but was hoping I could get the original SRI w/tune from someone. thx

Post Reply