Hey guys,
So here are two different datalogs of my 08 RDX with a CP-E intake and flashpro.
I flashed the ECU with the base (TUNED + K&N SRI) option. Did a few pulls and noticed some knocking with the knock retarding the timing alot.
I think its running lean, but why would hondata put out a base tune with these unsafe numbers??... please let me know what ya guys think.
The first datalog I was able to do a few WOT pulls
The second datalog was under light to medium load and it knocked even more.
Thanks!
First time datalogging
-
- Posts: 2
- Joined: Fri Jul 13, 2018 8:17 am
First time datalogging
- Attachments
-
- datalogjax91octkntuned2.zip
- (1.34 MiB) Downloaded 245 times
-
- datalogjax91octkntuned.zip
- (1.39 MiB) Downloaded 227 times
Re: First time datalogging
The intake is causing the engine to run about 7% rich. AFM tuning will fix this.
The knock control and knock retard are normal. There is some variance between vehicles, and then with different fuel and a different intake you will not run identically to another vehicle.
You need to look at the datalog and identify where the knock control increases, and pull a little ignition timing out in those areas. This will overall increase power as the knock control will be lower.
The knock control and knock retard are normal. There is some variance between vehicles, and then with different fuel and a different intake you will not run identically to another vehicle.
You need to look at the datalog and identify where the knock control increases, and pull a little ignition timing out in those areas. This will overall increase power as the knock control will be lower.
Hondata