Page 1 of 1

DTC P0034 disable option

Posted: Thu Oct 01, 2015 9:59 pm
by Kenb350z
I was wondering if it were possible to disable this DTC for those of use running aftermarket turbos?

Re: DTC P0034 disable option

Posted: Fri Oct 02, 2015 7:42 am
by Hondata
Is it possible to plug in the valve / actuator?

Re: DTC P0034 disable option

Posted: Fri Oct 02, 2015 2:02 pm
by Kenb350z
I currently do not have the valve / actuator. The sensor is still plug in; however, the valve/actuator is not connected. Do you think having a valve / actuator connected will help?

Re: DTC P0034 disable option

Posted: Fri Oct 02, 2015 2:11 pm
by Hondata
Yes. The error is low or high voltage, and with something plugged in it might go away.

Re: DTC P0034 disable option

Posted: Fri Oct 02, 2015 2:42 pm
by Kenb350z
Where would you recommend I run the hose's. The actuator sensor is plugged in, but there are no hose's running off of it. I think it is looking for boost or some kind of flow. The turbo boost sensor is fine, it is plugged into the BorgWarner.