Page 1 of 1

Injector Dead Time

Posted: Mon Jan 18, 2016 11:32 pm
by ALS2386
Hi,

I was setting my Hondata Mobile App v1.2 and it ask for injector dead time. What is the exact amount to put there?

Just in case, I have the K20Z3 turbo with DW800cc injectors, a Wallbro 255 fuel pump, and CT Engineering modified stock fuel pressure regulator(which add 10psi) for a total of 63psi

Re: Injector Dead Time

Posted: Tue Jan 19, 2016 10:25 am
by Spunkster
Use whatever dead times you have set in your calibration.

Re: Injector Dead Time

Posted: Tue Jan 19, 2016 11:26 am
by ALS2386
As I compare now, my current calibration is a base DW800 but with gas tables modified. The injector dead time(IDT) are the same.

Can you tell me if this DW800 base calibration IDT numbers are suppose to be the same for my car with all the previous mentioned set up, or the IDT numbers should change?

Re: Injector Dead Time

Posted: Tue Jan 19, 2016 11:41 am
by Spunkster
If it has been tuned with those dead times you should leave it alone or you will have to retune.