iOS Applications

Post Reply
User avatar
Hondata
Site Admin
Posts: 9169
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

iOS Applications

Post by Hondata »

With iOS devices you can either use the Hondata Mobile app, or use any app which uses the elm327 protocol.

To run the Hondata Mobile app you need the iPhone 4S and later, iPod touch 3rd generation and later, iPad 3rd generation and later. iOS 6 or later must be used. Many apps uses the elm327 protocol. The apps which we have tested are:
Hondata

Gernby
Posts: 308
Joined: Thu Oct 29, 2009 2:53 pm

Re: iOS Applications

Post by Gernby »

I was able to connect to my FlashPro from the Hondata Mobile app without any issues at all with my iPhone 5S, but could not figure out how to connect with DashCommand. Could you provide some tips?
'06 NFR S2000

User avatar
Hondata
Site Admin
Posts: 9169
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: iOS Applications

Post by Hondata »

DashCommand only works via WiFi. Your phone needs to be jailbroken and a BT to WiFi bridge installed. I used roqyBT4 & roqyBT7. The passcode also needs to be 1234
Hondata

antkouv
Posts: 29
Joined: Fri Apr 26, 2013 10:58 am

Re: iOS Applications

Post by antkouv »

Is there an update on this? Can we connect an iphone to the Flashpro using Dash command?

Post Reply