Need calibration

FlashPro questions & answers specific to the 2007-2008 Acura TL
Post Reply
thomcouts33
Posts: 1
Joined: Wed May 09, 2018 7:02 pm

Need calibration

Post by thomcouts33 »

If anyone can do calibration for me, just mp me. Just bolt-on:

-RV6 V3 precats delete
-Manifold intake/Throttle body 3.7l
-P2R Throttle body spacer
-P2R Intake manifold spacer
-P2R EGR delete
-J-Pipe ATLP V2-R
-Cold air intake custom 4inch
-Stock exhaust
+
4 codes
+
rev haaaaaang

Need help! Thank you!
NIGHTHAWK_BP
Posts: 2
Joined: Sat Apr 25, 2020 10:03 pm

Re: Need calibration

Post by NIGHTHAWK_BP »

did you ever get help with that? im dealing with the same issues.i have about the same mods just pnp runners mani and tb
NIGHTHAWK_BP
Posts: 2
Joined: Sat Apr 25, 2020 10:03 pm

Re: Need calibration

Post by NIGHTHAWK_BP »

and catback exhaust
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: Need calibration

Post by EFICU »

NIGHTHAWK_BP wrote: Sat Apr 25, 2020 10:17 pm and catback exhaust
What issues are you having?

Can you post a decent length datalog and the calibration you're driving on?
larrymenze
Posts: 3
Joined: Thu Jun 11, 2020 6:48 am

Re: Need calibration

Post by larrymenze »

I hope u got ur issues resolved. Im have similar issues. I cant do a new calibration with the mods I done to my 3.2. And now I having problems communicating with any hondata techs.
larrymenze
Posts: 3
Joined: Thu Jun 11, 2020 6:48 am

Re: Need calibration

Post by larrymenze »

finally got the running issue resolved after installing the 3rd TB. Runs well! when trying to install a new calibration Im having issues. I think I installed a base cal ok. When FP is connected properly to vech all the ck marks at the bottom of screen be green? Cant seem to set up and install a calibration with the mods I have.
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Need calibration

Post by Spunkster »

start a thread with complete details of the issues you are having.
Post Reply