Rev raise problem

FlashPro questions & answers specific to the 2007-2008 Acura TL
pa1nt13aller
Posts: 2
Joined: Wed May 06, 2015 3:35 pm

Re: Rev raise problem

Post by pa1nt13aller » Wed May 06, 2015 4:12 pm

Btw for those experiencing bucking and jerking after replacing a throttle body I have a thread in v6p for its fix. You need the HDS software to do a throttle plate relearn. But the rev hang is the ECU. And I hate it....so much.

User avatar
Hondata
Site Admin
Posts: 8718
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Rev raise problem

Post by Hondata » Thu May 07, 2015 7:11 am

Larger throttle bodies are not electrically compatible with your ECU. See http://www.hondata.com/forum/viewtopic.php?f=29&t=18527
Hondata

DomGSR-T
Posts: 60
Joined: Sat Apr 06, 2013 12:53 am

Re: Rev raise problem

Post by DomGSR-T » Thu May 07, 2015 3:33 pm

As for me on my TL-S I have the rev raise problem and jerkiness on the stock TB and on the ZDX TB. I use the stock TB for the last 8 months and the driving is not fun at all for a daily car...

User avatar
Hondata
Site Admin
Posts: 8718
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Rev raise problem

Post by Hondata » Thu May 07, 2015 4:11 pm

Then with the stock throttle body, provide a calibration and datalog with annotations and an exact description of the problem, and we'll look at it.
Hondata

DomGSR-T
Posts: 60
Joined: Sat Apr 06, 2013 12:53 am

Re: Rev raise problem

Post by DomGSR-T » Thu May 07, 2015 4:36 pm

DomGSR-T wrote:email sent with cal and log.

Thanks in advance

already sent my map and log to hondata support email address

User avatar
Hondata
Site Admin
Posts: 8718
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Rev raise problem

Post by Hondata » Fri May 08, 2015 7:40 am

DomGSR-T wrote:already sent my map and log to hondata support email address
Ok, thank you. I will look at it.
Hondata

DomGSR-T
Posts: 60
Joined: Sat Apr 06, 2013 12:53 am

Re: Rev raise problem

Post by DomGSR-T » Wed May 27, 2015 9:13 pm

Found anything yet? Is it normal that the timing stays ''ON'' when the %TB hits 0% ?

sockr1
Posts: 10
Joined: Wed Feb 27, 2013 10:29 pm

Re: Rev raise problem

Post by sockr1 » Mon Jun 29, 2015 12:26 am

any update to this issue?

DomGSR-T
Posts: 60
Joined: Sat Apr 06, 2013 12:53 am

Re: Rev raise problem

Post by DomGSR-T » Thu Jul 16, 2015 9:27 pm

Yes problem is solved! Thanks Hondata!

User avatar
Hondata
Site Admin
Posts: 8718
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Rev raise problem

Post by Hondata » Fri Jul 17, 2015 9:29 am

Did you use a newer version, or did you make other changes to the calibration?
Hondata

DomGSR-T
Posts: 60
Joined: Sat Apr 06, 2013 12:53 am

Re: Rev raise problem

Post by DomGSR-T » Fri Jul 17, 2015 10:01 pm

I just use the new feature that you have added for us. The one that was available for the kseries guys since version 1.7.0. Fixed the problem 100%

Post Reply