Plx Wide-band ecu pin output reference

2007-2008 Fit
Post Reply
lakia5524
Posts: 2
Joined: Fri Nov 16, 2012 8:50 pm

Plx Wide-band ecu pin output reference

Post by lakia5524 » Thu Aug 11, 2016 6:22 pm

Has any one with the fit done this for tuning to compare air fuel ratios ?

my biggest concern is for example if I disable my ECT2 sensor on the flashpro and remove the ecu output pin and wide band input to this it will still read with is disabled ?

Can this be wire tapped to the output wire instead of strait to the ecu ect2 pin?

any help would be great thanks

User avatar
Spunkster
Site Admin
Posts: 16446
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Plx Wide-band ecu pin output reference

Post by Spunkster » Fri Aug 12, 2016 10:12 am

What output wire are you referring to? You cannot use any outputs on the ECU, you must use an input, or it cannot read the signal from the wideband.

lakia5524
Posts: 2
Joined: Fri Nov 16, 2012 8:50 pm

Re: Plx Wide-band ecu pin output reference

Post by lakia5524 » Mon Nov 21, 2016 7:04 pm

would you be able to provide any of the pinout terminals numbers?

Post Reply