Question about MAP pressure

2012+ US/Canadian Civic Si / 2013+ ILX
Post Reply
schaffertnathan
Posts: 21
Joined: Thu Jun 28, 2018 6:31 am

Question about MAP pressure

Post by schaffertnathan »

At wide open throttle, under 6500 rpm the MAP pressure seems good at around -0.4 to -0.9, but every time as soon as it reaches 6500 rpm the pressure decreases to about -1.5 to -2. Does this mean anything, in terms of efficiency, or maybe the tune isn't as good as it can be?

I have a 3.75in CAI, stock TB and Manifold, and 3.75in Invidia Exhaust. My first thought was maybe the Cam Angles were not optimized. Is there a rough estimate of what they should be with that setup at high rpm.
schaffertnathan
Posts: 21
Joined: Thu Jun 28, 2018 6:31 am

Re: Question about MAP pressure

Post by schaffertnathan »

I mean 2.75in exhaust.
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: Question about MAP pressure

Post by EFICU »

That is pretty common from what I have experienced with the 9th gens. 8th gens seems to run columns 9-10 and the 9th gens run in 8-9 in WOT. Nothing to worry about.
Post Reply