Hondata

HI guys,

I'm facing a issue with a bigger throttle body, I've already set the Tplate normal table and increased the throttle flow vs opening table, but the same delay is still there.

Is it a hardware issue or there's something that I still have to change?
(I'm not a pro in tuning)

Thanks

Have you read the info at: http://www.hondata.com/forum/viewtopic. ... ottle+body

Thanks for the reply.
Yes, I had already read this topic, but my doubt is because when in neutral gear the throttle responds immediatly, but when moving, theres a enormous delay, almost 0,5 sec.

If there's no way to solve this by software, then, ok.

Thank you