Page 1 of 1

AFM Flow Voltage

Posted: Mon May 26, 2014 6:20 pm
by Slip_Angle
In the 2013 ILX AFM Calibration, the AFM Flow Voltage maxes out at 2.56v. When I do a datalog the AFM.v graph has entries well past that around the 3.7v range. Is there something else I need to enable?

Also, quick note -- you'll notice voltage is mis-spelled "volatge" in this area of the advanced calibration.

Re: AFM Flow Voltage

Posted: Tue May 27, 2014 5:09 pm
by Spunkster
Our software engineer will look into this.

Re: AFM Flow Voltage

Posted: Thu May 29, 2014 1:41 pm
by Hondata
This was a unit conversion problem, which we have fixed for the next release.

Re: AFM Flow Voltage

Posted: Thu May 29, 2014 4:13 pm
by Slip_Angle
Awesome, thanks!