K24z7 in car 1998-2002 take k24z7 ecu or use k20 cpu

2012+ US/Canadian Civic Si / 2013+ ILX
Post Reply
phoenixgold
Posts: 3
Joined: Wed Mar 20, 2013 3:36 pm

K24z7 in car 1998-2002 take k24z7 ecu or use k20 cpu

Post by phoenixgold »

sorry to ask but cant see any place where somebody take this engine in another car,el 1998-2002.
If flasspro can remove the key entry ,so the engine can work with the original cpu.
Or i need to use k20 cpu with flashpro.

In both way i need to buy hondata flashpro or k-pro .

if any can help.

Thanks all.

Sorry for bad english im french.
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: K24z7 in car 1998-2002 take k24z7 ecu or use k20 cpu

Post by Spunkster »

I'm sorry, but we don't offer anything for this type of an engine swap. You will have to use an earlier engine and K-Pro for this type of vehicle.
phoenixgold
Posts: 3
Joined: Wed Mar 20, 2013 3:36 pm

Re: K24z7 in car 1998-2002 take k24z7 ecu or use k20 cpu

Post by phoenixgold »

anyway i can plug the engine on another cpu ? or that can be done with some time ?
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: K24z7 in car 1998-2002 take k24z7 ecu or use k20 cpu

Post by Spunkster »

No, The newer engines use completely different sensors and trigers which are incompatible with older ECUs. You will find it much easier to just get a older engine and use the K-Pro.
phoenixgold
Posts: 3
Joined: Wed Mar 20, 2013 3:36 pm

Re: K24z7 in car 1998-2002 take k24z7 ecu or use k20 cpu

Post by phoenixgold »

if i keep all the wiring and put it in a new car(ecu,dash,key and all the interior ),do you have flashpro for this ecu to be tuned on dyno ?

and any hondata module to remove the ignition key option ?

that way i can use my ecu and just wire all stuff in.
Post Reply