Switch Module LED Colour

Post Reply
Bones126
Posts: 38
Joined: Thu Oct 04, 2018 2:09 am

Switch Module LED Colour

Post by Bones126 »

Hi,
I've fitted an second-hand traction control unit via the instructions on the site, but i can't find what the switch module led colour means. Mine is currently red which would suggest an error.
Could someone confirm please?

thanks
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Switch Module LED Colour

Post by Hondata »

Use the TC software and you will see any errors.
Hondata
Bones126
Posts: 38
Joined: Thu Oct 04, 2018 2:09 am

Re: Switch Module LED Colour

Post by Bones126 »

Thanks, will give it a go.
Bones126
Posts: 38
Joined: Thu Oct 04, 2018 2:09 am

Re: Switch Module LED Colour

Post by Bones126 »

Hondata wrote: Fri Jul 23, 2021 11:19 am Use the TC software and you will see any errors.
Hi, it’s saying the following

Error code 4 - LR WHEEL SIGNAL
Error code 5 - RR WHEEL SIGNAL.

thanks.
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Switch Module LED Colour

Post by Hondata »

Clear the errors with the software and see if they come back.
Hondata
Bones126
Posts: 38
Joined: Thu Oct 04, 2018 2:09 am

Re: Switch Module LED Colour

Post by Bones126 »

Hondata wrote: Sun Jul 25, 2021 3:17 pm Clear the errors with the software and see if they come back.
Thanks, cleared error codes and all OK now.
Possibly threw the errors up as it had been on the Dyno for tuning and back wheels not turning while the fronts were.

Thank you for you help.
Post Reply