Tire Change TC settings

Post Reply
huichex
Posts: 4
Joined: Mon Nov 02, 2015 10:44 am

Tire Change TC settings

Post by huichex » Mon Nov 02, 2015 10:48 am

I have the TC setup on my 06 S2000, with 255/40s all around. I am looking to go to a set of 275/40 in the rear. Is there a step by step on how to recalibrate the TC to work with this new tire combo? I searched the help section, but I couldn't find what I was looking for. Thanks in advance for your help.
Luis

User avatar
Spunkster
Site Admin
Posts: 17943
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Tire Change TC settings

Post by Spunkster » Mon Nov 02, 2015 11:19 am

You will need to enter the tire information and determine the number of pulses per mile in your traction control calibration in the traction control window.

huichex
Posts: 4
Joined: Mon Nov 02, 2015 10:44 am

Re: Tire Change TC settings

Post by huichex » Mon Nov 02, 2015 11:36 am

hey, thanks for the quick reply!

How do I get that info, and what window do I need to be in? Is it in the flash pro manager?
At what point to I have to hold my speed and hit calc?

User avatar
Spunkster
Site Admin
Posts: 17943
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Tire Change TC settings

Post by Spunkster » Mon Nov 02, 2015 1:17 pm

I believe you called and resolved your questions.

huichex
Posts: 4
Joined: Mon Nov 02, 2015 10:44 am

Re: Tire Change TC settings

Post by huichex » Mon Nov 02, 2015 1:26 pm

yes I did.
Thanks for your help.
Just to capture the info for others:

Looks like the S2000 sends 50 pulses per revolution. And the tires I am going to run are 807 Revolutions per mile per the manufacturer.
807*50= 40,350 pulses per mile

I will plug the traction control into the lap top and open up the TC manager software.

In settings, I will input [40,350 pulses per mile] for the rear wheels (only ones that I am changing) which should be real close.

Then take the car on a straight road at 40mph and hit calc on the setting screen to let it fine tune.

huichex
Posts: 4
Joined: Mon Nov 02, 2015 10:44 am

Re: Tire Change TC settings

Post by huichex » Tue Nov 03, 2015 3:28 am

One more detail that I had read on another thread.

does the Traction control knob have to be set to off for this process?

User avatar
Spunkster
Site Admin
Posts: 17943
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Tire Change TC settings

Post by Spunkster » Tue Nov 03, 2015 10:16 am

No, it does not, but depending on settings it may keep it from retarding any timing while setting it.

Post Reply