Question about Traction Control!

User avatar
R-12914
Posts: 349
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Question about Traction Control!

Post by R-12914 »

Hi,

do i need to fit/plug in this item always to the traction control module to adjust the traction control?:
http://www.cplracing.co.uk/site_images/ ... /185-2.jpg

Or it is not necessary or work without this part?
So once set and then unplugged?

Thanks!
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Question about Traction Control!

Post by Hondata »

It needs to be connected at all times.
Hondata
User avatar
R-12914
Posts: 349
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Re: Question about Traction Control!

Post by R-12914 »

Please can you tell me also the dimensions of the parts where including in the Hondata Traction Control?
I mean the exact dimensions of the "Traction Control Module" and the "Switch Module" in width, height, depth and screw mounting.

How much is in each case the cable length?

I need this dimensions, that i can check, whether the parts i can put into my car.

Thanks & Greeting,
Matthias
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Question about Traction Control!

Post by Hondata »

http://www.hondata.com/help/tractioncon ... ations.htm
The switch to main box cable is 7 feet long
Hondata
User avatar
R-12914
Posts: 349
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Re: Question about Traction Control!

Post by R-12914 »

The dimensions where you have posted are for the "Traction Control Module", how much are the dimensions for the "Switch Module"?
Which length is the cable from plug to the cable pins to the abs-sensors?

I need to know the exact dimensions!

THX!
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Question about Traction Control!

Post by Hondata »

The switch box is 1.5" high x 2.0" wide x 1" high, with a flange on the long side with total width of 2.865".
You can also take the switch circuit board out of the switch box, drill holes, and mount it elsewhere.
Hondata
Mintegra
Posts: 1
Joined: Wed Feb 25, 2015 1:19 pm

Re: Question about Traction Control!

Post by Mintegra »

I only have one question about hondata traction control, does the little black box know magic? I have a boosted, stroked, sleeved integra (it's as ridiculous as it sounds) and when I lay down 360 ftlbs of torque in 4th and 5th the car just moves. This and an LSD are a must on any honda. It works so well it fools your senses and logic. Well done everyone at hondata your products are amazing.
User avatar
R-12914
Posts: 349
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Re: Question about Traction Control!

Post by R-12914 »

Hondata wrote:It needs to be connected at all times.
Is it right, that if i do not use the "Use PID Control" hook...:
PID.jpg
PID.jpg (67.01 KiB) Viewed 15283 times
...Then i do not use the PID like this?:
185-2.jpg
185-2.jpg (137.6 KiB) Viewed 15283 times
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
User avatar
R-12914
Posts: 349
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Re: Question about Traction Control!

Post by R-12914 »

Hondata, please can you answer my question?
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Question about Traction Control!

Post by Hondata »

What is your question?
Hondata
User avatar
R-12914
Posts: 349
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Re: Question about Traction Control!

Post by R-12914 »

Hondata wrote:What is your question?
This post:
http://www.hondata.com/forum/viewtopic. ... 387#p85180
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Question about Traction Control!

Post by Hondata »

I do not understand your question.
Hondata
User avatar
R-12914
Posts: 349
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Re: Question about Traction Control!

Post by R-12914 »

With PID/PID control, do you mean this one?:
185-2.jpg
185-2.jpg (137.6 KiB) Viewed 15155 times
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Question about Traction Control!

Post by Hondata »

The picture is of the control box, which switches traction control on and off as well as selecting target slip. I'm not sure what the link to PID control is.
Hondata
User avatar
R-12914
Posts: 349
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Re: Question about Traction Control!

Post by R-12914 »

Hondata, you do not understand me!

You have written, that the control box (the dial with potentiometer) is necessary to run the Hondata Traction Control!?
Here is the control box:
PID.jpg
PID.jpg (67.01 KiB) Viewed 15148 times
What i mean is as follows:
Do i need this control box always, or only if i use the "Use PID Control" hook see as follows:
185-2.jpg
185-2.jpg (137.6 KiB) Viewed 15148 times
Or is the PID and the control box not the same?
Do you understand me, now?
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Post Reply