Traction Control in SI 08 Brazilian

Post Reply
Ciclonvnz
Posts: 1
Joined: Sat Mar 23, 2013 4:52 pm

Traction Control in SI 08 Brazilian

Post by Ciclonvnz » Sat Mar 23, 2013 5:03 pm

I have a Civic SI 08 Brazilian, I install the Hondata Traction Control, when looking at the wiring harness from the ABS sensors the colors do not match the ones in the tutorial Hondata, someone knows the colors corresponding to this version of vehicle?

User avatar
Hondata
Site Admin
Posts: 8639
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Traction Control in SI 08 Brazilian

Post by Hondata » Sun Mar 24, 2013 8:06 am

Look in the factory workshop manual.
Hondata

Neopoket
Posts: 2
Joined: Thu Apr 18, 2013 12:55 pm

Re: Traction Control in SI 08 Brazilian

Post by Neopoket » Thu Apr 18, 2013 1:02 pm

There are 4 speed sensors, one in each wheel. The wire colors for each sensor are:
Left Front: +B - white (Brazilian) or orange (US)
GND - Red (Brazilian) or gray (US)
Right Front: +B - Green (US and Brazilian)
GND - Red (US and Brazilian)
Right Rear: +B - Light green (US And Brazilian)
GND - blue (Brazilian) or white (US)
Left Rear: +B - Yellow (Brazilian) or blue (US)
GND - Purple (US and Brazilian)

Be carefully with left front because in braszilian car have 2 wire to abs with White and Red colors use a tester for check for continuity

User avatar
Hondata
Site Admin
Posts: 8639
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Traction Control in SI 08 Brazilian

Post by Hondata » Thu Apr 18, 2013 1:58 pm

Thanks for the information.
Hondata

sebas22
Posts: 8
Joined: Wed Feb 17, 2010 2:56 pm

Re: Traction Control in SI 08 Brazilian

Post by sebas22 » Wed Oct 09, 2013 4:39 pm

Where is the Ecu Power IGP1 ?

User avatar
Spunkster
Site Admin
Posts: 17672
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Traction Control in SI 08 Brazilian

Post by Spunkster » Wed Oct 09, 2013 4:47 pm

for what vehicle?

Post Reply