A little help with the orange wire :)

Post Reply
greenapple
Posts: 3
Joined: Sat Feb 14, 2015 3:00 am

A little help with the orange wire :)

Post by greenapple » Sun Feb 15, 2015 10:20 am

Hello everybody
I have S2000 with hondata KPro on it. I bought it with that ecu. A week ago I bought Traction Control, I wired everything but the orage wire. I checked the manual, I was looking for pinout on my hondata, but couldn't find anything and most of all I am still a noobie with hondata.
My KPro is with some kind of S2000 adapter r5. Can someone tell me which is the ELD input pin?

Image
Image

User avatar
Spunkster
Site Admin
Posts: 17864
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: A little help with the orange wire :)

Post by Spunkster » Mon Feb 16, 2015 10:37 am

The pin-out for the inputs and outputs on the S2000 K-Pro can be found at: http://www.hondata.com/help/kmanager/ecuconnectors.htm

greenapple
Posts: 3
Joined: Sat Feb 14, 2015 3:00 am

Re: A little help with the orange wire :)

Post by greenapple » Tue Feb 17, 2015 12:03 pm

This is the first thing I found online, but this is not my connectors, none of the tree in the diagram and I have four connectors. I think, first 3 is the stock wiring. I dont know what changes has been made on my car wiring ( i think none except the new sensors). Can some just point me the ELD input on my pics ? Or more similar diagram to my 4 connectors?
Thank you for your help :)

User avatar
Spunkster
Site Admin
Posts: 17864
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: A little help with the orange wire :)

Post by Spunkster » Tue Feb 17, 2015 12:29 pm

scroll down on the link provided and you will see it has the pin numbers for the ECU you have.

greenapple
Posts: 3
Joined: Sat Feb 14, 2015 3:00 am

Re: A little help with the orange wire :)

Post by greenapple » Tue Feb 17, 2015 2:56 pm

OK so
Image
This is my connector A. On A30 I have that greed/red wire. Does the ECU use it for something (stock wiring) or I can cut it and get there ? If no, my E connector is the last one (4th), with the new sensors. If that is E, E15 is free can I repin it and get there ? Or I still cant understand a thing :(

Or it is D not E connector... so I need A30 am I right ?

User avatar
Spunkster
Site Admin
Posts: 17864
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: A little help with the orange wire :)

Post by Spunkster » Tue Feb 17, 2015 4:28 pm

Don't use the diagrams, just use the table at the bottom of the prior link. The diagrams are for an RSX.

Post Reply