Page 2 of 2

Re: Need help setting up

Posted: Wed Jan 02, 2013 6:11 pm
by Adm_rsx
well I've got traction control working. but I still however still cannot view the datalog after taking one. any ideas as to why that is?

all I get is the downloading screen and once that goes away.... nothing....

thsnks

adam

Re: Need help setting up

Posted: Thu Jan 03, 2013 5:46 pm
by Spunkster
How exactly are you datalogging? Do you have both USB cables connected?

Re: Need help setting up

Posted: Thu Jan 03, 2013 5:53 pm
by Adm_rsx
Spunkster wrote:How exactly are you datalogging? Do you have both USB cables connected?

I've got both the Ecu cable and TC cable plugged into the USB's and I'm datalogging from the TC manager.

Re: Need help setting up

Posted: Thu Jan 03, 2013 5:57 pm
by Spunkster
You need to datalog in the Smanager, Kamanager or FlashPRo manager software. The datalogs from the Traction control unit itself in the Traction control software will be very short and Super high resolution.

Re: Need help setting up

Posted: Thu Jan 03, 2013 6:00 pm
by Adm_rsx
Spunkster wrote:You need to datalog in the Smanager, Kamanager or FlashPRo manager software. The datalogs from the Traction control unit itself in the Traction control software will be very short and Super high resolution.

So just like a normal datalog for tuning correct?

How would I veiw the TC portion of that log?

Re: Need help setting up

Posted: Fri Jan 04, 2013 10:26 am
by Spunkster
Just look at the sensor list and you can also configure the graph to show the parameters you want to look at.

Re: Need help setting up

Posted: Fri Jan 04, 2013 10:31 am
by Adm_rsx
Spunkster wrote:Just look at the sensor list and you can also configure the graph to show the parameters you want to look at.

Gotcha. Thank you, I see all the listings now and can make my own template. Thanks