Page 1 of 2

TC on RSX Problems

Posted: Sat Oct 13, 2012 10:40 am
by Max358
I started writing about my problem in this topic

http://www.hondata.com/forum/viewtopic.php?f=42&t=14710

Test in TC manager (ECU command output test) helped make sure that the right comes on ELD.
But if I turn on the test over slip, the only change in the value Kmanager ELD, is this normal? I enclose a screen shot. The machine is not a standstill, the engine on idle. including tests over slip.

After I recorded datalog with slip on 1 and 2 gears. (The extension csv is not allowed, i reneme .csv to .kal)

Thanks!!!

Re: Is this enough for working Traction Control?

Posted: Sun Oct 14, 2012 3:47 pm
by Hondata
The default settings in KManager should work for you.

Re: TC on RSX Problems

Posted: Sat Oct 27, 2012 11:29 am
by Max358
I update topic, help please!

Thanks!!!

Re: TC on RSX Problems

Posted: Sat Oct 27, 2012 8:58 pm
by Hondata

Re: TC on RSX Problems

Posted: Sun Oct 28, 2012 12:23 am
by Max358
Yes of course (3.2.0), the settings uploaded a new version with a laptop

kmanager should show what that other information besides ELD.V?

Re: TC on RSX Problems

Posted: Sun Oct 28, 2012 11:04 am
by Hondata
Are you datalogging with both KPro and TC plugged into the USB?

Re: TC on RSX Problems

Posted: Sun Oct 28, 2012 7:44 pm
by Max358
no, only TC. do today, thanks!

Re: TC on RSX Problems

Posted: Mon Oct 29, 2012 9:40 am
by Max358
I plugged KPro and TC plugged into the USB, Speed ​​began to show in the parameters Kmanager, the settings uploaded to ECU. But things are still did not help me.

Datalog of Kpro attached.
In Moscow cold weather now, slippery :)

Thanks!!!

Re: TC on RSX Problems

Posted: Mon Oct 29, 2012 11:10 am
by Spunkster
YOu need to post your calibration, datalogs as well as the traction control calibration file used.

Re: TC on RSX Problems

Posted: Mon Oct 29, 2012 12:34 pm
by Max358
I attach my firmware Kpro
And the configuration file TC (default "RSX" 2006 2006), there is almost no change settings

Re: TC on RSX Problems

Posted: Mon Oct 29, 2012 4:55 pm
by Spunkster
CHeck yout TCC file, as it appears you have it set to a rear wheel drive vehicle.

Re: TC on RSX Problems

Posted: Mon Oct 29, 2012 8:14 pm
by Max358
This is the default value for "RSX2006") Thank you! In the evening, I can check!)

Hurray!!! TC is working!!!
Hard to believe I did not notice that the selected rear-wheel drive.

You are planning fix the default setting for "RSX 2006"? If you look "Slip setup" Cornering for RSX is very similar to S2000

Very much like that would have been a settings file for my car with basic settings made ​​by experts

Re: TC on RSX Problems

Posted: Thu Nov 08, 2012 3:07 am
by Max358
Traction Control Calibrations which I use for RSX turbo (DC5)?

What is the difference and 2006civicSC 2006civicTC? What kind of car models?

Thanks!

Re: TC on RSX Problems

Posted: Thu Nov 08, 2012 10:28 am
by Hondata
2006SC is for a 270 hp supercharger car. 2006TC is for a 500+ hp turbocharged car.

Re: TC on RSX Problems

Posted: Fri Nov 09, 2012 10:39 pm
by sass
Max358 wrote:This is the default value for "RSX2006") Thank you! In the evening, I can check!)

Hurray!!! TC is working!!!
Hard to believe I did not notice that the selected rear-wheel drive.

You are planning fix the default setting for "RSX 2006"? If you look "Slip setup" Cornering for RSX is very similar to S2000

Very much like that would have been a settings file for my car with basic settings made ​​by experts
Who is your tuner in Moscow?