Traction control on PNF Ecu

Post Reply
sergiokazoom
Posts: 29
Joined: Sat Aug 19, 2017 10:01 am

Traction control on PNF Ecu

Post by sergiokazoom »

Hi! I have a 2004 Civic Si Ep3 running kpro v4. Turbo setup on boost by gear with the hondata boost solenoid. I want to purchase the Hondata Traction Control, but I am running a PNF ecu. If purchased and wired up, will the Traction Control be fully functionalrunning my PNF ecu?
User avatar
Spunkster
Site Admin
Posts: 22703
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Traction control on PNF Ecu

Post by Spunkster »

It will work, but you cannot use a PNF based calibration. You must use a PRB based calibration for Traction Control to be available.
DC5teggi
Posts: 15
Joined: Mon Apr 23, 2018 12:59 pm
Location: South Carolina
Contact:

Re: Traction control on PNF Ecu

Post by DC5teggi »

I see this is an old thread, but is the same true for a PND ECU in a base RSX? (both it working and requiring a PRB calibration)
2003 Acura RSX - K20A3
PND ECU with K-Pro v4
User avatar
Spunkster
Site Admin
Posts: 22703
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Traction control on PNF Ecu

Post by Spunkster »

The PND calibrations also have traction control.
Post Reply