Traction control datalogging question

Post Reply
Speedtek1408
Posts: 3
Joined: Wed Apr 03, 2013 1:12 am

Traction control datalogging question

Post by Speedtek1408 » Sat Sep 19, 2015 11:37 pm

Ok so I'm finally using the traction control n got it working to a certain point. As I'm looking at my datalog. I see the slip rates and see the engine retarding and doing what it's suppose to be doing but it's not picking up the whee speed for the front and rear. With the tires off the ground I spin the tires and the module lights up with the tire I spin. So obviously all of that is working fine. It's just not recording my wheel speed. N I'd like it to work so I can adjust my launch compensation. Thanks in advance.

User avatar
Hondata
Site Admin
Posts: 8714
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Traction control datalogging question

Post by Hondata » Mon Sep 21, 2015 7:39 am

Without seeing a datalog I'd guess that it could be a scaling issue. Do you mean the datalog downloaded from the TC and the s300? Can you post a datalog?
Hondata

User avatar
Spunkster
Site Admin
Posts: 17850
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Traction control datalogging question

Post by Spunkster » Mon Sep 21, 2015 9:35 am

Also post your TC calibration file.

Do you have both USBs plugged in when you are datalogging this?

Speedtek1408
Posts: 3
Joined: Wed Apr 03, 2013 1:12 am

Re: Traction control datalogging question

Post by Speedtek1408 » Wed Sep 23, 2015 9:36 am

Yes both cables are plugged in. N I'll post my datalog when I download it from my car. Thanks.

What does it mean when u folks say it's a scaling issue?

Post Reply