Page 1 of 1
Terminals and pin tool for TCS connector
Posted: Tue Mar 05, 2019 8:19 pm
by RallyCivic
Hi,
I need to connect to the CAN output of the TCS controller. Where can I get the wire terminals for the connector and the pin tool?
Re: Terminals and pin tool for TCS connector
Posted: Wed Mar 06, 2019 10:31 am
by Hondata
They've changed all the part numbers, but here goes... The connector is AMP172143 (now Tyco 172143-1) The housing is 172047-2. Pins should be 1-170321-1 or 1-170291-1 or 1-170291-4 See
https://www.te.com/usa-en/product-172047-2.html
Also any crimp tool will work for terminals that big.
Re: Terminals and pin tool for TCS connector
Posted: Sun Mar 10, 2019 5:15 pm
by RallyCivic
Thanks, ordered some from mouser.